Samsung SHR-1041K SHR-1041K/SAM system management, settings, _ settings, ❖adding a user, ❖editing the user

settings

❖adding a user

•user id/password : Enter the user ID and password.

-You can type in up to 14 bytes including spaces for the password.

•group id : Select one from MANAGER and USER GROUP.

•e-maiL : Enter the email address.

-Enter the whole name including the email ID and domain name.

You can type in up to 36 bytes including spaces for the email address. Refer to "using virtual Keyboard". (Page 26)

CAM1					CAM1
	SYSTEM
	DATE/TIME
		ADD
	NETWORK	ADMIN		ADMIN
		USER ID
		PASSWORD
	MAIL	GROUP ID			MANAGER
CAM1		E-MAIL			OFF
	USER	E-MAIL NOTIFICATION
	MANAGEMENT
	SYSTEM		OK		CANCEL
	MANAGEMENT
	CONTROL
	DEVICE	ADD				APPLY	UNDO

•e-maiL notiFication : Turns on or off the notifi cation of an email.

- This is available only if you have set the E-MAIL NOTIFICATION in <event/sensor>.

❖editing the user

To change the user information, select an applicable item. You will see the <edit> window.

.When your settings are completed, click <appLy> on the bottom.

Your settings will be applied.

system management

CAM1				CAM1
	SYSTEM
	DATE/TIME
		EDIT
	NETWORK
		USER ID			ABC
		PASSWORD		XXXXXXXX
	MAIL	GROUP ID		MANAGER
CAM1		E-MAIL
	USER	E-MAIL NOTIFICATION			OFF
	MANAGEMENT
	SYSTEM	DELETE	OK		CANCEL
	MANAGEMENT
	CONTROL
	DEVICE	ADD				APPLY	UNDO

You can check the current system version and upgrade it if you want to, back up data or reset the settings.

.In the <system setup> window, use the direction buttons ($%_+/ENTER) to select <system>.

.Select <system management> and use the direction buttons ($%_+/ENTER) to select and set a desired item.

CAM1			CAM1
	SYSTEM
	DATE/TIME
		SYSTEM INFORMATION		PRESS
		SYSTEM NAME			SHR-1041
	NETWORK	F/W UPGRADE		PRESS
		FACTORY DEFAULT		PRESS
	MAIL	SYSTEM DATA		SAVE LOAD
		PASSWORD			ON
CAM1USER			CAM1
	MANAGEMENT
	SYSTEM
	MANAGEMENT
	CONTROL
					APPLY	UNDO
	DEVICE

•system inFormation

You can check the current system version and system-related settings.

-ip address : Displays the IP address of the DVR.

-mac address : Displays the DVR’s MAC address.

-disK capacity : Displays the capacity of the HDD.

-F/w version : Displays the fi rmware version.

-h/w version : Displays the hardware version.

-video signaL type : Displays the signal type of the current video.

-domain name : Displays the domain name of the appropriate set.

CAM1			CAM1
	SYSTEM
	DATE/TIME
		IP ADDRESS	127.0.0.0
	NETWORK	MAC ADDRESS	00:11:5F:00:00:01
		DISK CAPACITY	250 GB
		F/W VERSION	V1.0
	MAIL	H/W VERSION	13.23.03.ff
CAM1		VIDEO SIGNAL TYPE	NTSC
	USER	DOMAIN NAME	f000001.websamsung.net
		NET CLIENT PORT	6100
	MANAGEMENT
		WEB SERVER PORT	80
	SYSTEM
	MANAGEMENT		OK
	CONTROL		APPLY	UNDO
	DEVICE

_ settings