time setting in sync with the network time server

①Select a time zone for your area.

②Click <apply> button to apply the selected area.

③Set the network time server and press the <sync.> button.

④You can set the time manually if the time server could not set the correct time for your area.

⑤If you does not follow the instructions above, it may fi nd time related errors with recording and data search.

M ￿ If you set the date/time to the past, you will see a warning message

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

From

2009/01/01 00:00:10

 

 

 

 

 

 

 

 

 

 

 

 

 

that prompts you to delete data if there is any in the past time you set.

 

 

 

To

2009/01/01 00:00:06

 

 

 

 

 

• YES: Deletes the data and applies the time change.

 

 

 

Overlapped date will be erased

 

 

 

 

 

 

 

 

 

CAM1

 

 

• NO: Cancels the change of the date/time.

 

 

 

 

 

 

YES

 

 

 

 

NO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

networK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

. In the <system setup> window, use the direction

CAM1

 

 

 

 

CAM1

 

 

 

 

 

 

 

 

 

buttons ($%_+/ENTER) to select <system>.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYSTEM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

. Select <networK> and use the direction buttons

 

DATE/TIME

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DHCP

 

 

 

WEB SERVICE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

($%_+/ENTER) to select and set a desired item.

 

NETWORK

 

DDNS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IP ADDRESS

 

 

 

 

127.0.0.0

 

 

 

 

 

• dhcp : Set the IP address of the DVR to a dynamic IP.

 

 

 

GATEWAY

 

 

 

 

127.0.0.1

 

 

 

 

 

 

 

 

1ST DNS SERVER

 

 

 

 

127.0.0.1

 

 

 

 

 

 

 

MAIL

 

SUBNET MASK

 

 

 

 

255.255.255.0

 

 

 

 

 

- If <dhcp> is selected, the setting values of ip

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAM1USER

 

DDNS SERVER

 

CAM1

websamsung.net

 

 

 

 

 

2ND DNS SERVER

 

127.0.0.1

 

 

 

 

 

address, gateway, suBnet masK, 1st dns

 

MANAGEMENT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYSTEM

 

NET CLIENT PORT

 

 

 

 

6100

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

server and 2nd dns server will be automatically

 

 

WEB SERVER PORT

 

 

 

 

80

 

 

 

 

 

 

 

 

MANAGEMENT

 

MAX TX SPEED

 

 

 

 

 

8 Mbps

 

 

 

fi lled.

 

DEVICE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTROL

 

 

 

 

 

 

 

 

APPLY

 

UNDO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- If <dhcp> is not selected, you should manually enter the setting values of ip address, gateway,

suBnet masK, 1st dns server and 2nd dns server.

￿For the IP address, contact the network administrator.

￿If you change the network setting, your changes will be applied after the system restarts.

•weB service : Set the use of the web server.

•ddns : Connect to the DVR using a specifi c domain name with no need to manually enter an IP address in the client side.

￿Refer to "DDNS Setting". (Page 32)

•ip address : Enter an IP address.

•gateway : Enter a gateway address.

•suBnet masK : Enter a subnet mask address.

•1st dns server : Enter the fi rst DNS server address.

•2nd dns server : Enter the second DNS server address.

•ddns server : This is the address of the Samsung DDNS server that assigns a specifi c domain name to the set featuring the dynamic IP.

•net cLient port : Indicates a port used when the remote management software program accesses the DVR.

•weB server port : Indicates a port used to connect to the DVR using the web browser.

•max tx speed : Set the network transfer speed.

- Select one from 56, 128, 256, 512 Kbps, 1, 2, 4 and 8 Mbps.

The video will be transferred below the set speed, which may differ according to the network connection status.

settings ●

English _1