settings

motion sensor area

Select <area> on the right pane of the MOTION SENSOR window to display the MOTION SENSOR area setup screen. The borders of the selected MOTION SENSOR area cells will be shadowed.

❖ selecting an area with the mouse

Click a desired cell or click a point and drag it to

CAM1

extend as much as you want.

 

- The selected area will be marked yellow.

 

❖selecting an area on the front panel or the remote control

Click a cell and press the [enter] button, and use the direction buttons ($%_+) to move to a desired cell and press the [enter] button to select the area.

-The selected area will be marked yellow.

❖ area setup using the menu

SELECT ALL

DESELECT ALL

CANCEL

SAVE & EXIT

EXIT

Right-click, or press the [return] button on the front panel or the remote control to display the menu.

•seLect aLL : Selects all areas.

•deseLect aLL : Deselects all areas.

•canceL : Cancels your settings.

•save & exit : Saves your settings and exits the menu.

•exit : Exits the area setup menu.

. When your settings are completed, click <appLy> on the bottom. Your settings will be applied.

. When done, if you want to move to the previous menu, press the [return] button on the front panel or the remote control, or click < >on the top right corner.

sound

You can confi gure the settings of audio and Buzzer.

Using the mouse may help easier selection of related items.

M

￿ You must press the [RETURN] button for the item selected using the <

 

> buttons before you can move to a

 

 

different menu item.

 

 

1.In Live screen, right-click any area or press the [menu] button on the front panel or the remote control.

. Use the up/down buttons ($%/ENTER) to select <system setup>. You will see the "Login" dialog.

ON

_ settings