DIGITAL VIDEO RECORDER
GB |
|
| GB |
| 4 | ||
3 |
| ||
| System Connection for Alarm Recording | Connection with PC for Use | |
<Rear Side Connection Terminal of | <Outside Product> |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 1 | 2 | 3 | 4 | 5 |
1 | ALARM IN | 1 | GND |
2 | ALARM RESET | 2 | TRIGGER IN |
3 | ALARM OUT | 3 | ALARM IN |
6 | TRIGGER OUT | 4 | ALARM CANCEL |
1 | GND | 5 | ALARM OUT |
■Alarm recording is a function for recording the input video when an alarm signal is input while a device with alarm output is connected to this unit.
■Connect to the corresponding terminals, as the numbers may be different for external devices.
■For external devices, if the alarm input (ALARM INPUT) and alarm cancel (ALARM CANCEL) are not available, you can leave them unconnected.
Connection with RS-232C
A. Communication Method
●Data Code: ASCII Code
●Protocol: 8 bit Data, 1 Stop bit, None Parity
●Transmission speed: 4800, 9600, 19200, 38400 bps
B. RS-232C terminal (D-SUB 9 Pin) and Pin specifications
5 | 1 |
96
Pin No | Pin Specifications |
|
|
2 | TXD (Transmitted Data) |
|
|
3 | RXD (Received Data) |
|
|
5 | SG (Signal Ground) |
|
|
1, 4, 6~9 | NO Connection |
|
|
