DIGITAL VIDEO RECORDER

GB

 

 

GB

 

5

4

 

 

Unpacking

HDD Addition

When purchasing product, first remove packing and put it on a flat floor or at a place to use it. Then, ensure all following contents are included:

◗Main body

◗User’s Manual ◗1 power cord

◗2 Rack Mount Adapter

◗SCREW-MACHINE (PH, UNC6-32, L4.2, WHT) x 4 ◗Remote Viewer Program Installation CD

Caution

The above contents can be changed without notice in order to improve the performance or function of the product.

Mounting HDD

1.Unfasten the SCREW-SPECIAL (BWH, M4, L8, WHT) 11 EA attached to the left, right, and rear of the product, and then remove the CABINET-TOP from the product.

2.Unfasten the SCREW-TAPTITE (BH, M3, L6 WHT) 3 EA to remove the HDD from the BRACKET-HDD as shown in the picture.

3.Attach the HDD to the BRACKET-HDD as shown in the picture, and fasten the SCREW- MACHINE (PH, UNC6-32 L4, WHT) 4 EA supplied as ACCESSORY.

4.Place the HDD with the BRACKET-HDD inside the product, and fasten the SCREW- TAPTITE (BH, M3, L6 WHT) 3 EA.

5.Connect the Power Supply Cable and the AT-Bus Interface Cable. (Refer to “Cable Connection” on page 1-10.)

6.Put the CABINET-TOP back on, and fasten the SCREW-SPECIAL (BWH, M4, L8, WHT).

SCREW-TAPTITE(BH, M3, L6, WHT)

CABINET-TOP

HDD

BRACKET- HDD

SCREW-SPECIAL(BWH, M4, L8, WHT)

SCREW-MACHINE(PH, UNC6-32, L4, 2, WHT)

Caution

Basically, a product with two HDDs has two HDDs attached to the HDD brackets as it is introduced to the market. And a product with a single HDD is supplied with an extra HDD bracket aside from the HDD bracket for attaching the HDD.

1-7

1-8