DIGITAL VIDEO RECORDER

GB

 

GB

 

➄ PRE ALARM TIME LIMIT

⑧ MOTION DETECTION

The pre-alarm recording is an important function which enables you to find out about the situation

The DVD will start recording images whenever it detects any movement only when ALARM

immediately before a motion is detected in the input video or before alarm occurs. Set how much

ENABLE is set to ON. At this time, you can set the detailed items about the motion detection

video data you want to record before the motion is detected or alarm is triggered. About 2 seconds

in the SET AREA & SENSITIVITY menu. To force stop the recording started by the motion

to 10 seconds of video data are stored in the system’s SDRAM at all times. When a motion is detect-

detection, press and hold the STOP(■) button for 3 seconds. Then, the recording started by the

ed or alarm is triggered, as much data as it is set in the PRE ALARM TIME LIMIT is taken from

motion detection will be paused for 5 seconds, during which time you should go into the menu

the SDRAM and written to the HDD as it simultaneously begins the alarm recording. However, since

and set the MOTION DETECTION to OFF to completely stop the recording. If no action is

the capacity of the SDRAM is limited, the field rate of the pre-alarm recording will decrease as the

performed by the user for 5 seconds, the system resumes the recording started by motion

time set in the PRE ALARM TIME LIMIT is increased.

detection. [ON/OFF]

[10SECOND/8SECOND/6SECOND/4SECOND/2SECOND/OFF]

 

Caution

 

 

 

 

Caution

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If the system is currently recording, the PRE ALARM TIME LIMIT settings will not be

When performing the recording started by motion detection, the recording time is

applied even when alarm occurs. The PRE ALARM TIME LIMIT settings are applied

determined by the the time set in MAIN ALARM TIME, PRE ALARM TIME LIMIT, and

only if the system is not currently recording.

 

 

 

POST ALARM TIME LIMIT as it was the case in the alarm recording.

➅ POST ALARM TIME LIMIT

 

 

 

 

⑨ SET AREA & SENSITIVITY

 

 

 

Set the amount of video data you want to record immediately after a motion is detected in

1) AREA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the input video or alarm is triggered. The system records as long as the time set in the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Areas for motion detection are 4 in total and you can set the LEVEL, SIZE, and MOVE

MAIN ALARM TIME, and then records more data as long as the time set in the POST

for each area. When you go into SET AREA & SENSITIVITY menu, the following

ALARM TIME LIMIT.

 

 

 

 

 

 

 

 

screen appears and the cursor is positioned at the AREA item. At this time, press the

[5MINUTE/4MINUTE/3MINUTE/2MINUTE/1MINUTE/30SECOND/20SECOND/

10SECOND/OFF]

 

 

 

 

UP(

) or DOWN(

 

 

 

) button to select the desired area (AREA 0 ~ AREA 3), and press

 

 

 

 

 

 

 

 

the

SET/STILL(

 

 

 

) button to move

the cursor to the LEVEL item to set the

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

sensitivity level for the selected area. [0/1/2/3]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The following illustrates the temporal relationship among the main alarm recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

time (MAIN ALARM TIME), pre-alarm recording time (PRE ALARM TIME LIMIT), and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AREA=0

LEVEL=OFF

[SIZE][MOVE]

post alarm recording time (POST ALARM TIME LIMIT) based on the time of alarm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

occurrence.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AREA 0

 

 

 

AREA 1

 

 

Alarm Occurrence

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRE ALARM TIME LIMIT

MAIN ALARM TIME

POST ALARM TIME LIMIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AREA 2

 

 

AREA 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

➆ MAIN ALARM PICTURE RATE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set the main alarm recording field rate. If the input video signal is NTSC, a maximum of

2) LEVEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

60 FPS can be recorded; if PAL, a maximum of 50 FPS can be recorded.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sensitivity to motion can be set from LOW to HIGH+, or to OFF. Closer to HIGH, more

1) NTSC

 

 

 

 

resensitive to motion, closer to LOW, more insensitive to motion.

 

 

 

 

Press the UP(

) or DOWN( ) buttion to set the sensitivity level, and press the

[60.00FPS/30.00FPS/15.00FPS/10.00FPS/7.50FPS/5.00FPS/ 2.50FPS/

SET/STILL(

 

 

) button to move the cursor to the SIZE item to set the size of the motion

1.00FPS/0.50FPS]

 

 

 

 

 

 

 

 

 

 

detection area.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2) PAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[OFF/LOW/LOW+/MIDDLE/MIDDLE+/HIGH/HIGH+]

[50.00FPS/25.00FPS/12.50FPS/8.30FPS/ 6.25FPS/5.00FPS/2.50FPS/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.00FPS/0.50FPS]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3-19

3-20