Samsung SLM2825DWXAA manual IPv4 configuration using SetIP Windows, Setting IP address

Wired network setup

5

Setting IP address

First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network.

6Click the icon (third from left) in the SetIP window to open the TCP/IP configuration window.

7Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information

assigned by a network manager before proceeding.

IPv4 configuration using SetIP (Windows)

Before using the SetIP program, disable the computer firewall from Control

Panel > Security Center > Windows Firewall.

The following instructions may differ for your model.

1Download the software from the Samsung website then unpack and

install it: (http://www.samsung.com > find your product > Support or

	Downloads).	Find the machine’s MAC address from the Network Configuration Report
		(see "Printing a network configuration report" on page 102) and enter it
2	Follow the instructions in the installation window.	without the colons. For example, 00:15:99:29:51:A8 becomes
		0015992951A8.
3	Connect your machine to the network with a network cable.
4	Turn on the machine.	8 Click Apply, and then click OK. The machine will automatically print the
		Network Configuration Report. Confirm that all the settings are
5	From the Windows Start menu, select All Programs > Samsung	correct.

Printers > SetIP > SetIP.

2. Using a network-connected machine 103