Samsung SM/T530NYKAX Wi-Fi Direct, IP address View your device’s IP address not configurable

–MAC address: View your device’s MAC address, which is required when connecting to some secured networks (not configurable).

–IP address: View your device’s IP address (not configurable).

•WPS push button: Set up a connection to a WPS (Wi- Fi Protected Setup) router or other equipment.

•WPS PIN entry: View the PIN used by your tablet to set up a PIN-secured connection to a Wi-Fi router or other equipment (not configurable).

•Help: Learn about setting up and using Wi-Fi networks, and other settings.

Wi-Fi Direct

Wi-Fi Direct allows device-to-device connections so you can transfer large amounts of data over a Wi-Fi connection.

These devices must be enabled for Wi-Fi Direct communication. This connection is direct and not via a hot spot or Wireless Access Point (WAP).

1.From a Home screen, touch ➔ Settings ➔ Connections tab ➔ Wi-Fi.

2.Touch the OFF/ON button to turn Wi-Fi ON .

3.Touch Wi-Fi Direct. Your device begins scanning for other devices enabled with Wi-Fi Direct.

4.Enable Wi-Fi Direct on the target device.

5.In the list of available devices, touch the target device.

– or –

If you want to connect to more than one device, touch Multi connect and touch each device to which you want to connect that supports Multi-connect. Touch Done.

6.On the target device, touch Accept (you have 30 seconds to touch Accept).

Once connected, the target device will show as Connected in your list of Wi-Fi Direct devices and the icon will display on the Status Bar.

Connections 82