connecting to other devices

RECORDING (DUBBING) IMAGES ON A VCR OR DVD/ HDD RECORDER

You can record (dub) images played back on this camcorder onto other video devices, such as VCRs or DVD/HDD recorders. Use the Audio/Video cable (provided) to connect the camcorder to another video device as shown in the following figure:

To connect
1.￿Open the LCD screen and the jack cover.2.Connect the camcorder to the recorder.

•Connect the provided Audio/video cable to the terminals of the external device matched to each cable color.

Camcorder

VCRs or DVD/

 

HDD recorders

Yellow White Red

AV

AV Cable

Signal flow

To copy

1.￿Choose the external input by pressing the input source button of the recording device.

• Refer to the manual of the recording device.2.Playback the selected video to be copied. ￿page 413.Start copying the video by pressing the record button of the recorder.4.Press the stop recording button of the recorder to finish copying.

• Be sure to use the AC adaptor to power the camcorder from a household AC outlet to prevent battery power from shutting off during recording on another video device.

• Make sure to control the volume. Setting the volume too high may introduce noise to the recording video.

• When you connect the Audio/Video cable, match the color of the Audio/Video cable and the TV terminals.

• You can copy videos by watching the images on the camcorder if the VCRs or DVD/HDD recorders is connected to the TV. (You can connect the external device as the same way of connecting a VCRs or DVD/HDD recorders to the TV in home.)

96

• To prevent recording OSD (information) to be displayed along with the AV signal, set the "TV Display" to

"Off" in Menu Settings. ￿page 82