You can divide a video clip as many times as you want in order to delete a section you no longer need. The videos will be divided in groups of two.
PRECHECK!
Press the Mode 
button to select the Play mode. page 19
3.Select a desired video clip using the Control button ( / / / /OK).
•The selected video clip is paused.4.Search the point of division by pressing the Control button (/ /OK).
5.Press the MENU button to pause at the point of division.•A message appears asking for your confirmation.6.Select "Yes."•If you want to delete an unwanted section of a video clip, divide the video first, and then delete the image (section) you no longer need. After dividing the video clip, you can also combine other desired videos. page 66
•The second part of the divided video is displayed at the end of the thumbnail index.
Video
Edit
Divide
Combine
Exit
Divide
0:00:55 |
| 1/10 |
Exit | Move | Select |
0:00:27/0:00:55
Divide
Divide 
Play 
Frame
Example: You can divide a video clip into two in order to delete a section you no longer need.
1. Before dividing | 2. After video is divided at 30 second point. | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.After deleting first video.
0~60 seconds | 0~30 seconds | 31~60 seconds | 0~30 seconds |
•The video clip is divided into two videos.
•The Divide function is not available under the following conditions:
-If the total recorded time of the video is less than 6 seconds.
-If you try to divide sections without leaving 3 seconds at the beginning and the end.
-If the video file was recorded in the Time Lapse REC mode.
-If the remaining section of the storage media space is less than 40MB.
-If the video was recorded or edited by other devices.
•You cannot delete a protected image. You must first release the protect function to delete it. page 61
•The division point may drift before or after the designated point by approximately 0.5 seconds.
•When the divide function is operating, the Control button (/ ) FF/REW/F.ADV/Slow functions
can be used at the same time in single view. | 65 | |
|
|
|