INSERTING / EJECTING THE MEMORY CARD
Inserting a memory card | Ejecting a memory card |
1.Turn the camcorder off.
2.Slide and open the battery/memory card cover as shown in the figure.
3.Insert the memory card into the memory card slot in the direction of the arrow in the figure until it softly clicks.
4.Close the cover.
1.Turn the camcorder off.
2.Slide and open the battery/memory card cover as shown in the figure.
3.Slightly push the memory card inwards to pop it out.
4.Pull the memory card out of the memory card slot and close the cover.
•As shown in the figure, be sure to insert the memory card with the label facing right.
•Do not format the memory card on a PC.
•Do not eject a memory card during operations such as recording, playback, formatting, deleting, and editing. Doing so may damage the memory card or cause loss of data.
•Be careful not to push the memory card too hard. The memory card may suddenly pop out.
•If this is a new memory card, a card formatted by another device, or a card containing data stored by another device, format the card. ²page 73
•Formatting erases all data on the memory card.
Your camcorder supports only SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards. Card compatibility with the camcorder may vary depending on the manufacturer and type of memory card.
31
