Samsung SNC-B2315P manual Rear, Ethernet cable port Connect the power cable to this port

Rear

1

2

4

5

1Audio Out

2Audio In

3SDHC Memory Card Slot

4Video Out

5Reset Button

6Ethernet Port

7Power Port

		3
		9
6	7	8

For outgoing audio signals.

For incoming audio signals.

This is where you insert your SDHC memory card.

For outgoing video signals from the camera. This port connects to the monitor’s video in port.

Reverts all camera settings to their default.

When it is pressed for 3 seconds, the system indicator goes out and the system reboots.

When the camera is reset, connection is possible only after the basic network settings (IP address, subnet mask, gateway, etc.) have been configured again using the IP installer program.

Ethernet cable port.

Connect the power cable to this port.

06_ Preparation