Setting up the External Input Source | Samsung SP-H800 instruction

Setting up the External Input Source

You can select a device connected to the projector to display.

Connections and Source Setup

One Touch

MENU

1

2,3,4

…/†

4

EXIT

5

Press the desired source button (COMP.1/ COMP.2/ S-VIDEO/COMPOSITE/ PC/DVI).

Pressing a button switches to the respective mode. You can not switch to the mode if the projector is not connected to the respective device.

Component1

Setting up the External Input Source

1	Press the MENU button.
	The main menu is displayed.

2Press the button to select Input.The Input menu is displayed.

3Press the button to select Source List.The Source List menu is displayed.

4	Press the ▲ or ▼ button to move to desired input
	mode, then press the	button.
	The source input you chose is displayed.

If the input mode is not selected, check that cables are in place.

				Input

	Source List		: Component1 √
	Edit Name			√
Move		Enter		Return
			Source List

	Component1			: - - - -
	Component2			: - - - -
	S-Video			: - - - -
	Composite			: - - - -
	PC			: - - - -
	DVI			: - - - -

Move Enter Return

5Press the EXIT button to exit the settings.

26

Image 26

Samsung SP-H800 manual Setting up the External Input Source

Contents

Owners Instructions Table of Contents Troubleshooting Features and Design Optical engine adopting advanced DLP technology Projector Lamp Page Preparation Front/Upper Side and Accessories Indicator Information Rear Side and Cables Rear Side Remote Control Buttons Keystone Operating the Remote Control Operating Move/Select Button Using Remote Control in Dark Place Light Installation To Install the Projector Turning ON/OFF Turning On Projector Zoom and Focus Adjustment Using the Zoom Knob and the Focus Ring Leveling with Adjustable Feet Using the Lens Shift Dial Using the Lens Shift Dial Screen Size and Projection Distance Page Connections and Source Setup Check the following Before Connecting Before Connections Connecting to VCR/Camcorder/Cable Box Connecting to DVD Connecting to Video Equipment Connecting to the Digital TV Receiver Setting up the External Input Source Naming the External Connections Picture Adjustment Picture Adjustment Settings for Each Picture Mode Selecting Picture ModeSelecting Picture Mode Custom Picture Menu Custom Settings of the PictureCustom Settings of the Picture Changing the Color Standard Changing the Color Standard Selecting and Adjusting Color Temperature Color Temperature Gamma Correction Gamma ModeGamma Correction Saving Custom Picture Settings Settings DNIe Mode Setting up DNIeSetting up DNIe Selecting Picture Size Selecting Picture Size Picture Adjustment Selecting Picture Size Supported Picture Sizes Screen Position Adjustment Screen Position Adjustment Selecting Noise Reduction Selecting Noise Reduction Color Control Color Control ModeColor Control Film Mode Film Mode Overscan Overscan Black Level Modes Setting the Black LevelSetting the Black Level Still Picture Page Setup Install Menu Flipping/Reversing the Projected Image Light Setting Mode Light SettingSetup Correcting Vertical Keystone Correcting V-Keystone Test Patterns Test Pattern Menu Restoring the Factory Default Settings Information Press the Info button Setting the LED LED Operating Modes Menu Option Setting the Language Menu Option Setting the Menu Position Setting the Menu Translucency Setting the Menu Translucency Setting Up the Menu Display Time Selecting the Quick Menu Connecting to PC Before Connecting to PC Display modes supported by this projector Setting up the PC Environment Table supported by this projector Connecting to PC Using PC Video Cable or DVI Cable Pin Configuration of PC Video Port Plug Vesa Plug & Play Automatic Picture Adjustment Automatic Picture Adjustment Frequency Adjustment Fine Tuning with the Phase Adjustment Zooming the Screen Reset the PC Reset the PC Troubleshooting Before Contacting Service Personnel Before Contacting Service Personnel Screen and External Source Page Other Information Storage and Maintenance Cleaning the Projector and Lens Purchasing Optional Parts Optional Parts Gamma Mode Antenna in Port Glossary DLP HD2+, DC3 Select Composite/S-Video/Component Input Mode Structure of Screen Menu LED Structure of Screen Menu Lamp Replacement Lamp Replacement Procedure RS-232C Connection and Control Commands Specifications Classification Model SP-H800 Remote Control Specifications Function and Transmission Codes