Samsung SP52Q7, SP54T7, SP48T6, SP47Q7, SP43T8, SP42W4, SP43J9, SP54J9, SP65W3 Plug and Play Feature

Plug and Play Feature

ENG

PLUG & PLAY

ANT. INPUT : CHECK

	SELECT	EXIT
		AUTO STORE
AREA		: ASIA W/EUROPE
SEARCH		: -/+

SELECT	ADJUST	EXIT
	TIME
CLOCK	: -- : -- AM
TIMER	: OFF

SELECT		ADJUST	EXIT
	ENJOY YOUR WATCHING

When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

1If the television is in Standby mode, press the POWER () button on the remote control.

Result: The message PLUG & PLAY is displayed. It flickers for a little while and then LANGUAGE menu is automatically displayed.

2Select the appropriate language by pressing the ▼ or ▲ button. Press the MENU button to enter the language.

Result: The message ANT. INPUT : CHECK is displayed.

➣If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later.

3Make sure that the antenna is connected to the TV. Press the ➛ or ❿
button.

Result: The AUTO STORE menu is displayed with AREA is selected.

4Select your country by pressing the ➛ or ❿ button.

To search the channels, select SEARCH by pressing the ▼ or ▲ button, and then press the ➛ or ❿ button.

Press the MENU button to stop the search.

Result: The TIME menu is displayed with CLOCK is selected.

➣Refer to “Storing Channels Automatically” on page 18.

5Press the ➛ or ❿ button to move to the hour or minute. Set the hour or minute by pressing the ▼ or ▲ button.

➣Refer to “Setting and Displaying the Current Time” on page 34.

6When you have finished, press the MENU button.

Result: The message ENJOY YOUR WATCHING is displayed, and then the channel which has been stored will be activated.

14