Programming the Remote Control for Other Components
ENG
Power |
|
|
|
|
TV | VCR | Cable | DVD | SET |
This TV’s remote control can operate almost any VCR, Cable box, or DVD, in addition to controlling the TV.
➣The remote control might not be compatible with the TV manufactured by another company.
1Turn off your VCR, Cable box, or DVD.
2Press the appropriate button among the component selection buttons to activate another component (TV, VCR, Cable, DVD).
Example: If you want to program the remote control to operate your VCR, press the VCR button on the remote control.
3Press the SET button.
4Use the numeric buttons to enter the code by manufacturer. Each code must be three digits long.
Example: To enter the code “6”, press 0, 0, and 6. To enter the code “76”, press 0, 7, and 6.
➣See the remote control code tables to find the appropriate code for your particular component. If more than one code is listed, try each one separately until you find the one that works.
5Press the Power (
) button on the remote control. The component you select should turn on. If it turns on, your remote control is now set correctly.
➣If it does not turn on, repeat steps above, but try one of the other codes listed for the brand of particular yours. If no other codes are listed, try each code, “000” through “089” for VCR/DVD and “000” through “077” for Cable box.
6Once your remote control is set up, press the SELECT button any time you want to use the remote to operate your Cable box, VCR or DVD.
➣◆ When your remote control is in the VCR, Cable, or DVD mode, the volume buttons still control your TV’s volume.
◆When your remote control is in the TV or Cable mode, the VCR or DVD control buttons (PLAY, PAUSE, etc.) still operate your VCR or DVD.
46
