Plug & Play Feature
When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available.
1If the television is in Standby mode, press the POWER (
) button on the remote control.
Result: The message Plug & Play is displayed. It flickers for a little while, and then the Language menu is automatically displayed.
2Select the appropriate language by pressing the † or … button.
3Press the ENTER ( 
) button to confirm your choice. Result: The message Antenna Input Check is displayed.
4Make sure that the antenna is connected to the TV, and then press the ENTER ( 
) button.
Result: The Area menu is displayed.
5Select your area by pressing the † or … button.
6Press the ENTER ( 
) button to confirm your choice. Result: The Auto Store menu is displayed.
7To start the search, select the Start and press the ENTER ( 
) button.
Result: The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range, (with lowest first and highest last). The programme originally selected is then displayed.
➢To stop the search before it has finished or return to normal viewing, press the EXIT ( 
) or ENTER ( 
) button.
8When it has finished, the message Enjoy your watching is displayed, and then the channel which has been stored will be activated.
ENG
Plug & Play
Press ENTER to start Plug & Play.
Start Exit
Language
English
Français
Türkçe
Move | Enter | Exit |
Plug & Play
Antenna Input Check
Start Exit
Area
Asia/W. Europe
CIS/E. Europe
China
Hongkong/UK
Australia
NZ/Insonesia
South Africa
America
Move 
Enter 
Exit
Auto Store
Press ENTER to start channel store.
Start Exit
Auto Store
Channel store in process.
Storing175MHz
18%
Exit
Enjoy your watching
15
