Pin Configurations
ENG
SCART Connector | DVI Input Connector |
(AV1/AV2/AV3) | (24Pin) |
Pin | Signal |
| Pin | Signal | |
1 | Audio output R | 1 | T.M.D.S. Data2- | ||
2 | Audio input R | 2 | T.M.D.S. Data2+ | ||
3 | Audio output L | 3 | T.M.D.S. Data2/4 Shield | ||
4 | Audio chassis return | 4 | T.M.D.S. Data4- | ||
5 | Video chassis return (RGB blue) | 5 | T.M.D.S. Data4+ | ||
6 | Audio input L | 6 | Clock (DDC) | ||
7 | RGB blue input | 7 | Data (DDC) | ||
8 | Switching voltage | 8 | Not Connected | ||
9 | Video chassis return (RGB green) | 9 | T.M.D.S. Data1- | ||
10 | - |
| 10 | T.M.D.S. Data1+ | |
11 | RGB green input | 11 | T.M.D.S. Data1/3 Shield | ||
12 | - |
| 12 | T.M.D.S. Data3- | |
13 | Video chassis return (RGB red) | 13 | T.M.D.S. Data3+ | ||
14 | - |
| 14 | +5V Power | |
15 | RGB red input | 15 | 5V Grounding | ||
16 | Blanking signal (RGB switching) | 16 | Hot Plug Detect | ||
17 | Video chassis return | 17 | T.M.D.S. Data0- | ||
18 | Blanking signal ground | 18 | T.M.D.S. Data0+ | ||
19 | Video output | 19 | T.M.D.S. Data0/5 Shield | ||
20 | Video input | 20 | T.M.D.S. Data5- | ||
21 | Screening/chassis return | 21 | T.M.D.S. Data5+ | ||
|
|
| 22 | T.M.D.S. Clock Shield | |
➢ Pins 5, 7, 9, 11, 13, 15 and 16 are used for | |||||
23 | T.M.D.S. Clock+ | ||||
RGB processing and are only wired on the AV1 | 24 | T.M.D.S. Clock- | |||
or AV3 connector. |
|
| |||
|
| ||||
PC Input Connector |
| ||
(15Pin) |
| (9Pin) |
|
Pin | PC IN | Pin | Signal |
1 | Red (R) | 1 | Carrier Detect |
2 | Green (G) | 2 | Receive Data |
3 | Blue (B) | 3 | Transmit Data |
4 | Grounding | 4 | Data Terminal Ready |
5 | Grounding (DDC) | 5 | System Ground |
6 | Red (R) Grounding | 6 | Data Set Ready |
7 | Green (G) Grounding | 7 | Request to Send |
8 | Blue (B) Grounding | 8 | Clear to Send |
9 | Reserved | 9 | Ring Indicator |
10Sync Grounding
11Grounding
12Data (DDC)
13Horizontal sync.
14Vertical sync.
15Clock (DDC)
60
