Programming the Remote Control for Other Components
ENG
This TV’s remote control can operate VCR, CATV , DVD, or
| ➣ The remote control might not be compatible with the TV |
|
| manufactured by another company. | TV |
|
| |
1 | Turn off your VCR, Cable box, DVD or STB. |
|
2 | Press the SELECT button. Mode is changed whenever SELECT |
|
| button is pressed. (new mode is displayed on LED screen.) |
|
3 | Press the SET button. |
|
4 | Use the numeric buttons to enter the code by manufacturer. Each |
|
| code must be three digits long. |
|
| Example: To enter the code “6”, press 0, 0, and 6. |
|
| To enter the code “76”, press 0, 7, and 6. |
|
| ➣ See the remote control code tables to find the appropriate |
|
| code for your particular component. If more than one code |
|
| is listed, try each one separately until you find the one that |
|
| works. |
|
5Press the POWER ( 
) button on the remote control.
The component you select should turn on. If it turns on, your remote control is now set correctly.
➣If it does not turn on, repeat steps above, but try one of the other codes listed for the brand of particular yours.
6Once your remote control is set up, press the SELECT button any time you want to use the remote control to operate your VCR, Cable box, DVD or STB.
➣◆ When your remote control is in the VCR, CATV, DVD or STB mode, the volume buttons still control your television’s volume.
◆When your remote control is in the TV or CATV mode, the VCR or DVD control buttons (PLAY, PAUSE, etc.) still operate your VCR or DVD.
61
