other information

INITIAL VALUES

This product operates in the following initial values:

For changing the settings or registering/deleting the user card, refer to the applicable section in this document.

1)Entry permitted for a registered card

-The door control relay operates for 3 seconds.

-The green LED indicator flashes for 3 seconds.

2)Entry denied for an unregistered card

-The alarm relay operates for 2 seconds.

-The red LED indicator flashes for 2 seconds.

3)Duress Mode Password : 00

The TTL output port produces a signal for 3 seconds in Duress mode.

4)QUICK MODE : Disabled

5)Chime Bell Output : Enabled

Chime Bell Operating Time : 0.5 second

6)Melody Sound : Enabled

7)Keypad Input Limited Use : 20 seconds

8)When an input signal is sensed : ‘H’ € ‘L’ (common for all inputs)

9)When a TTL output signal is sensed : ‘H € L’

10)Patrol Mode Delay Time : 00 minute

11)Door Sensor Sensing Time : 00 second

12)Retry count for an unauthenticated entry : 05 times

13)Alarm for Dismantled Device : Disabled

Dismantled device Alarm Output Port : 02 (Alarm Relay)

14)Toggle Mode : Disabled

15)Control Lock by the Door Sensor : Disabled

42_ additional features

Page 42
Image 42
Samsung SSA-S2000/EXP manual Other information, Initial Values, This product operates in the following initial values