TO SPECIFY THE ALARM OUTPUT PORT FOR THE DISMANTLED DEVICE
Specify the alarm type for the dismantled device. The alarm rings from the dismantlement of the device to the authentication of the Master Card or a registered card.
1.Present the Master Card to the device.
X Y Z
2. Press Button 8 and Button 4 in sequence and press ENT .
3.Provide the alarm output port and press ENT .
•The default is set to “02” (alarm).
For the alarm output port settings, refer to the output port table on page 29.
•The alarm for the dismantled device occurs regardless of the operation mode of either Normal or Secure so you simply specify the operation port only. (To specify the operation port, refer to the operation port settings in the output port setting table on page 29.)
|
| \ | ] |
|
|
| ` |
tGj | lzj | W | lu{ |
| |||
| i |
|
|
|
|
| zzhTzYWWW |
| X | Y | Z |
| [ | \ | ] |
| ^ | _ | ` |
| lzj | W | lu{ |
| i |
|
|
|
|
| zzhTzYWWW |
BASIC SETUP
TO OPEN OR CLOSE THE ENTRY DOOR
Follow the step below If you want to keep the door open regardless of the authentication process using the Master Card or PIN.
1.Present the Master Card to the device.
2. Press Button 4 and Button 1 in sequence and press ENT .
•To release opening the door, repeat Step 1 above, select the < 4 2 > buttons and press ENT .
tGj
X Y Z
\ ]
`
lzj W lu{
i
zzhTzYWWW
X Y Z
[\ ] ^ _ `
lzj W lu{
i
zzhTzYWWW
English _ 27
