I/O time setup
❖Output Port Setting Table
You must specify the port settings using whatever combination of the followings if you want the device to operate in Secure mode or normal + Secure mode.
Port | Setting Value | Example | |
|
|
| |
Operation mode setting value |
| EX 1) | |
|
| If only the door relay operates in normal and | |
Operate only in Secure mode | 00 | Secure modes | |
|
| Normal and Secure modes: 50 | |
Operate in normal mode and Secure mode | 50 | ||
Door Relay: +01 | |||
|
| ||
Operation port setting value |
| Output Port Setting Value: 51 | |
|
|
| |
Operate the door relay only | 01 | EX 2) | |
|
| ||
Operate the alarm relay only | 02 | If the alarm relay and the TTL output operate in | |
|
| Secure mode | |
Operate the TTL output only | 04 | ||
Secure Mode: 00 | |||
|
| Alarm Relay, TTL: +06 | |
Operate the door relay and TTL output | 05 | ||
Output Port Setting Value: 06 | |||
|
| ||
Operate the alarm relay and TTL output | 06 | ||
| |||
|
|
|
TO SPECIFY THE OUTPUT TIME IF THE CARD IS AUTHENTICATED
I/O TIME SETUP
You can specify the output time if the card ID is authenticated.
When the card ID is authenticated, the door relay and the TTL output operate for a set time.
1.Present the Master Card to the device.
2. Press Button 2 and Button 1 in sequence and press ENT .
3.Enter the
4.Specify the
•For instance, if you set the door open time to “03” and TTL to “00”, the door relay operates for 3 seconds for an authenticated card ID.
•By default, the door relay operates for “03” seconds while the TTL output works for “00” second in normal and Secure modes.
•You can specify from 10 to 99.
X Y Z
\ ]
`
lzj W lu{
i
zzhTzYWWW
X Y Z
[\ ] ^ _ `
lzj W lu{
i
zzhTzYWWW
English _ 29
