User’s Guide

d-1 PASSWORD set-up

–For password input, move CURSOR(R) to PASSWORD SET, press ENTER, and put in the 4-digit number.

–For the selection regarding whether to use a password or not, move CURSOR(R) to disable (or enable), and press ENTER. Each time you press a button, enable and disable change. When you come out of the set-up mode press the MENU button.

→PASSWORD SET ENABLE

d-2 BAUD RATE set-up

Move CURSOR(R) to the Baud rate you want, and press the ENTER button.

d-3 When you set up the controller address, move CURSOR(R) to ADDRESS NO., press and ENTER button, put in the number, and press the ENTER button.

∗“0”: STAND ALONE, “1”: MASTER,

“2”~“8”: SLAVE

∗If only one unit is used, set to “0”.

∗If multiple units are connected together, set one of them to “1”, and others to “2” ~ “8”. If one of those is set to “0”, communication error occurs.

∗If Samsung Web Transmitter or DRS (Digital Recording System) is connected, set to “0”.

→ 38400

bps

19200

bps

9600

bps

4800

bps

PASSWORD SET

BAUD RATE 38400

→ADDRESS NO [ 0]

14