Samsung SSC-1000/N, SSC-1000/P 4) Manipulating the MATRIX SWITCHER

4) Manipulating the MATRIX SWITCHER

aMANUAL SELECT action

This is a function for putting out camera visuals of your discretion in the monitor of your discretion.

Monitor selection is MON+NO.+ENTER, and camera selection is CAM+NO.+ENTER. At this time, install so that the matrix switcher input channel number and the address no of either the camera or the receiver unit are the same.

The selected monitor number and the camera number get indicated in the first line of the LCD.

And, the matrix switcher's action mode gets indicated in the second line.

bSEQUENCE SWITCHING action

This is a function for automatically converting the cameras corresponded to each monitor of the matrix switcher.

When you press the SEQUENCE button in the manual select mode, cameras corresponded with monitors indicated in the LCD get consecutively converted.

At this time, sequence run is indicated in the LCD. If you press the HOLD button in the sequence run mode, automatic conversion actions are stopped, and sequence hold gets indicated in the LCD.

If you press the NEXT or BEFORE button in this state, it gets converted to the next visuals or the previous visuals of the visuals being put out presently.

If you want to automatically convert again, press the SEQUENCE button. If you want to convert the SEQUENCE RUN Mode to the manual select mode, press CAM+NO.+ENTER.