2) Manipulating the camera

aFor manipulating the camera, since only the concerned cam no. indicated in LCD is possible, first select the camera you want to manipulate. For camera selection, when you press CAM+NO+ENTER the camera no. gets indicated in LCD.

bIn the third line of LCD, the camera's action state gets indicated. Initially, it appears as “MANUAL”. And, in this state, by using the JOY STICK and LENS CONTROL buttons, you can manipulate the light turning mark and the lens. According to the manipulation angle of the Joy Stick, the rotation speed of the light turning mark gets varied.

cAUTO PAN action

When repeatedly moving the space in between two spots set-up in the camera menu, press the AUTO PAN button. At this time, the LED of the AUTO PAN button gets turned on, and in the third line of LCD, it gets indicated as “AUTO PAN”. If you want to cancel the auto pan mode, press the AUTO PAN button again.

dSCAN action

This is a function for moving the preset positions in many places designated to the camera's scan mode set-up mark to the converted time mark and watching. If you press the SCAN button in the manual mode, scan action gets performed, and, at the same time, the LED of the SCAN button get turned on, and “SCAN” gets indicated in the LCD. If you want to cancel the scan mode, press the SCAN button once again.

ePATTERN action

This is a function for watching 30 seconds of the camera's moves set up by the user according to the camera's pattern mode set-up. Press the PATTERN button in the manual state, put in the pattern no. you want, and when you press the ENTER button pattern action gets performed. At this time, the LED of the PATTERN button gets turned on, and “Pattern [ ]” gets indicated in the LCD. If you want to cancel the pattern action, press the PATTERN button once again.

fPRESET action

This is a function for selecting and watching the preset position set up in the camera. If you want to select the PRESET Position you want, press the PRESET button, put in the appropriate number in the position you want, and press the ENTER button. At this

time, the LED of the PRESET button gets turned on, “Pattern [ ]” gets indicated in the LCD. Once the operation is finished, current move is changed to MANUAL MODE.

17