Connecting Your VCR to the Satellite receiver or Other Equipment
Plug & Auto Set Up
You can connect your VCR to the Satellite receiver or other VCR using the SCART cable if the appropriate outputs are available on the equipment chosen. The following illustrations give a few examples of the connection possibilities.
1. AV1(EURO AV): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV1(EURO AV) socket on the rear of the VCR.
After making this connection, select the source by pressing the INPUT button for the AV1 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the VCR, e.g.
| Aerial |
|
Satellite Receiver or other Equipment |
|
|
Aerial Connector | 2 | TV |
| ||
AV1(EURO AV) |
|
|
| TV |
1 | AV1(EURO AV) |
| |
| SCART Cable |
1. AV2 IN: By means of 21-pin Scart Cable ★(SV-6333X/SV-2333X only)
When the satellite receiver or other equipment is connected to the AV2 socket, AV2 SET must first be set to EING. (see page 22)
Plug the SCART Cable with satellite receiver or other equipment into the AV2(DECODER/EXT.) socket on the rear of the VCR.
After making this connection, select the source by pressing the INPUT button for the AV2 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
Aerial
Satellite Receiver or other Equipment
2TV
AV1(EURO AV)
SCART Cable
1
AV2(DECODER/EXT.)
TV
AV1(EURO AV)
SCART Cable
Your VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory. The process takes a few minutes. Your VCR will then be ready for use.
1Connect the coaxial cable as indicated on page 10. (Connecting Your VCR to the TV Using the Coaxial Cable)
2Plug the VCR into the mains. It will automatically tune itself in and store TV stations in the memory.
3The process will finish after a few minutes. Then the VCR automatically switches itself off.
GB
TV |
2 |
12
13
