Samsung SV-6333X Protecting a Recorded Cassette, Recording a Programme with Automatic Stop

Protecting a Recorded Cassette

Recording a Programme with Automatic Stop

GB

1

Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.

1If you wish to protect a cassette, break off the tab using a small screwdriver.

2To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.

This function enables you to record up to nine hours of programmes. (LP)

Your VCR stops automatically after the requested length of time.

1	Switch on the television.
2	To monitor the programme being recorded, select the television
	channel reserved for use with your VCR (or the AV input if used)
3	Insert the cassette on which the programme is to be recorded,
	with the window visible and the safety tab intact or the opening
	covered with adhesive tape.
	Result:	The VCR is switched on automatically.

		3
	V-LOCK	DISPLAY
LR/RST	F.ADV	4

Recording a Programme Immediately

4 Select:

◆ The station to be recorded using the PROG (" or ❷) buttons

			DISPLAY
					4
CLR/RST	F.ADV
INPUT	INDEX	TRK	PROG
REPEAT	MENU				4
C			A	U
E				DI
R				O
	B	TV/V
		MENU
C				A
				U	DI
E
R					O
	5	TV/V
			CR
	D
E
E
P
S

★

OK

OK

6

Before recording a programme, you must have preset the corres- ponding station (unless you are recording via an external video source). If you have not done so, refer to pages 18 and 19.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

Result: The VCR is switched on automatically.

4Select:

◆The station to be recorded using the PROG (" or ❷) buttons or

◆The AV1 or AV2 ★(SV-6333X/SV-2333X only) source using the INPUT button for a satellite tuner or external video source

Result: The station number is displayed and the programme can be seen on the television.

★With SV-6333X/SV-6332X, you can select the recording speed (SP/LP). Press the SPEED button.

5Hold REC (●) down for a while to start recording.

Result: The record indicator appears on the television and VCR display. An index is recorded on the tape (see page 35).

6To stop recording, press ■ once.

➢◆ If the cassette is ejected when you start recording, check that the safety tab is intact or the opening is covered with adhesive tape.

◆If you reach the end of the tape while recording, the cassette rewinds automatically.

or

◆ The AV1 or AV2 ★(SV-6333X/SV-2333X only) source using

the INPUT button for a satellite tuner or external video source

Result: The channel number is displayed and the programme can be seen on the television.

★With SV-6333X/SV-6332X, you can select the recording speed (SP/LP). Press the SPEED button.

5Hold the REC button (●) down for a while to start recording. Result: The record indicator appears on the television screen

and VCR display. An index is recorded on the tape (see page 35).

6Press the REC button (●) several times to increase the recording time in:

◆30-minute intervals up to four hours

◆1-hour intervals up to nine hours (LP)

Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the VCR stops recording automatically.

7If you wish to cancel the recording before the end, press

STANDBY/ON.

☛If the end of the tape is reached while recording:

◆The recording stops

◆The VCR automatically turns off

INPUT	INDEX	TRK PROG
REPEAT	MENU				4
C			A	U
E				DI
R				O
REPEAT		MENU
C				A	U
E					DI
R	6				O
		T	V/V
	UB
	D		CR
	D
E
E
P
S
	★

DAUER 2:30
DAUER EINSTELLEN:
REC	DRÜCKEN

24

25