Samsung SV-2303X Auto Repeat Play, Using the Tape Counter, Interval Repeat Play, The tape counter

Auto Repeat Play

Using the Tape Counter

PROG	OPTIONS	INSTALL
CLOCK	BONUS	LANG
ZUSATZFUNKTIONEN
$❷!!➛❿!! OK		BEENDEN: MENU
BONUS

AUTO-AUS		:AUS
❿ WIEDERHOLEN		:AUS
BER. WIEDERHOLEN : 5
$❷ ❿	BEENDEN:		MENU

You can set repeat play to repeat the tape continuously from beginning to end.

1Press MENU on the remote control.

Result: The programming menu is displayed.

2Press the corresponding $ , ❷ or ➛, ❿ buttons to select the

ZUSATZFUNKTIONEN option.

3Press the OK button to select this option.

Result: The ZUSATZFUNKTIONEN menu is displayed.

4Press the corresponding $or ❷ buttons, until the cursor is placed in front of the WIEDERHOLEN option.

5	To...	Press ➛ or ❿, until...
	Repeat play	EIN is displayed.
	Do not wish to repeat play	AUS is displayed.

6On completion, press MENU twice to exit the menu.

The tape counter:

◆Indicates the elapsed time in the play and record modes (hours, minutes and seconds)

◆Is reset when a cassette is inserted in the VCR

◆Allows you to find the beginning of a sequence easily

☛If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.

1	Insert a cassette in your VCR.
2	To set the tape counter to zero at the beginning of a sequence:
	◆ Press DISPLAY twice to display the counter
	◆ Press CLR/RST when you want to set the tape counter to
	zero
3	To fast-forward or rewind to the sequence at which the counter
	was set to zero, simply press ➛➛ or ❿❿.
	Result: The VCR stops automatically when the counter
	reaches zero.
	➢ Some VCR information, such as the counter, can be
	displayed on the television screen (unless you have

GB

		0:00:00
	SHUTTLE	IPC
	V-LOCK	DISPLAY
RST	F.ADV
		2
PUT	TRK	PROG
	INDEX
	V-LOCK	DISPLAY

Interval Repeat Play

deactivated the OSD mode; refer to page 16).

Press DISPLAY:

CLR/RST F.ADV
2	PROG
TRK

PROG	OPTIONS	INSTALL
CLOCK	BONUS	LANG
ZUSATZFUNKTIONEN
$❷!!➛❿!! OK		BEENDEN:MENU
BONUS

AUTO-AUS :AUS

WIEDERHOLEN :AUS

❿ BER. WIEDERHOLEN : 5

$❷ ❿ BEENDEN: MENU

You can set interval repeat play to repeat the cassette several times for special interval.

1Press MENU on the remote control.

Result: The programming menu is displayed.

2Press the corresponding $ , ❷ or ➛, ❿ buttons to select the

ZUSATZFUNKTIONEN option.

3Press the OK button to select this option.

Result: The ZUSATZFUNKTIONENN menu is displayed.

4Press the corresponding $or ❷ buttons, until the cursor is placed in front of the BER. WIEDERHOLEN option.

5	To...	Press ❿, until...
	Interval repeat play	5, 10, 15 is displayed.
		(choose repeat time 5 times,
		10 times, 15 times)
	Cancel interval repeat play	AUS is displayed.

6On completion, press MENU twice to exit the menu.

7To select interval during playback, press the INPUT/REPEAT button at the desired start point.

Result: “INTERVAL REPEAT SETTING” is displayed. Press the INPUT/REPEAT button one more time at the desired end point.

Result: The tape is automatically rewound to the start point. “INTERVAL REPEAT” is displayed.

◆ Once to display the current function, programme

number, recording speed ★(SV-6333X/SV-6332X only),

date, time and counter

◆ Twice to display the counter only

◆ Three times to display the time remaining on the

cassette

◆ Four times to clear the display

INPUT	INDEX
REPEAT	MENU
C	A	U
E		DI
R		O

36

37