![](/images/new-backgrounds/1236676/23667639x1.webp)
TROUBLESHOOTING
We do not expect you to have any problems with your
Problem | Remedy |
|
|
|
|
The incoming message is incom- | Be sure the memory is not full. |
plete. |
|
|
|
The incoming message is un- | Be sure VOLUME is set to the desired |
clear. | sound level. |
|
|
The TAD does not answer after | Be sure the TAD is set to answer calls. |
two, four, or seven rings. |
|
|
|
Lo appears on the display. | The backup battery is weak. Replace the |
| battery (see “Installing a Backup Battery” |
| on Page 7). |
|
|
The TAD does not respond to the | Make sure the phone you used to dial the |
remote operation security code. | TAD is a |
| et tone dialer. |
|
|
| |
| code, pressing each button for 2 seconds. |
|
|
| Make sure the remote operation security |
| code you entered is correct, or try entering |
| the default code of 798. The remote oper- |
| ation security code might have reset to the |
| default code due to a power failure and |
| weak backup battery. |
|
|
If the TAD still doesn’t operate properly, try resetting it (see “Resetting the TAD” on Page 21) or take it to your local RadioShack store for assistance.
20