Samsung TX-T3091WH specifications Connecting a VCR, Connecting a Camcorder, Video Connection

Connecting a VCR

Video Connection

These instructions assume that you have already connected your TV to an antenna or a cable TV system(according to the instructions on page 6). Skip step 1 if you have not yet connected to an antenna or a cable system.

➢ Each VCR has a different back panel configuration.

 When connecting a VCR, match the color of the connection terminal to the cable.

1Unplug the cable or antenna from the back of the TV.

2Connect the cable or antenna to the ANT IN terminal on the back of the VCR.

3Connect an Antenna cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.

4Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [VIDEO] jack on the TV.

5Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 [L-DVI IN/AUDIO-R] jacks on the TV.

➢If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

VCR	Rear of the TV
	5 Audio Cable
	(Not supplied)
4	Video Cable(Not supplied)
2
3	Antenna Cable(Not supplied)

➢Also, you can connect to AV IN 2 on the side panel of TV.

S-Video Connection

Your Samsung TV can be connected to the S-Video jack of a VCR.

(This connection delivers a better picture when compared to the regular video connection above.)

➢ Each VCR has a different back panel configuration.

 When connecting a VCR, match the color of the connection terminal to the cable.

1To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

2Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN 2 [S-VIDEO] jack on the TV.

3Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 2 [L-AUDIO-R] jacks on the TV.

➢Some games may be displayed with a cut off picture when the TV is connected to a game player.

Side of the TV Rear of the TV

VCR

3 Audio Cable (Not supplied)

2 S-Video Cable(Not supplied)

1Antenna Cable(Not supplied)

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR.

➢ Each Camcorder has a different back panel configuration.

 When connecting a Camcorder, match the color of the connection terminal to the cable.

1Connect a Video Cable (or S-Video Cable) between the AV IN 2 [VIDEO] (or S-VIDEO) jack on the TV and the VIDEO OUT jack on the camcorder.

2 Connect Audio Cables between the AV IN 2 [L-AUDIO-R] jacks on the TV and the AUDIO OUT jacks on the camcorder.

Camcorder	Side of the TV
	1 S-Video Cable(Not supplied)
or	1 Video Cable(Not supplied)

2 Audio Cable(Not supplied)

English - 7