Samsung U-CA 3 manual Setting up the Mycam menu, Avatar, Menu tab Main menu Sub menu

Setting up the MYCAM menu

You can set up a start up image, start up sound, shutter sound and AVATAR. Every camera working mode (with the exception of Voice recording mode) has the MyCAM menu.

Menu tab	Main menu	Sub menu		Page
	AVATAR	OFF		P.74
		CHANGE
	S.IMAGE	OFF	IMAGE1	P.75
		IMAGE2	IMAGE3
	S.SOUND	OFF	SOUND1
				P.76
		SOUND2	SOUND3
	SH.SOUND	OFF	SOUND1
				P.76
		SOUND2	SOUND3

Avatar

You can transfer avatar files created with the DigiStudio program to the camera and play them back in Play mode (SUCAxxxx.mov) or use the desired avatar as the startup image (SAVAxxxx.mov).

-In order to be able to save an avatar to the camera, the camera driver must be installed on your PC. For installation instruction, please refer to page 95.

-Avatar: The word "avatar" came from ancient Sanskrit and referred to the incarnation of a god that appears in this world. In computer terms, an avatar is a 3D or 2D graphic representation.

Storing Avatars for the Startup Image

1.Connect the camera to your PC. (See page 83.)

2.Open Windows Explorer, select the folder in which your avatars are located (C:\My Avatar), and then select avatar(s) for the startup image (SAVAxxxx.mov).

3.Right-click on the avatar and select [Copy].

4.Select the DCIM\AVATAR folder in the removable drive.

5.Right-click on the removable drive and select [Paste] to copy the avatar(s) to the memory card.

73