Samsung U-CA 3 manual Lamp, Connecting to a Power Source

Identification of features

Still image mode

You can select from Auto, Manual, or Night mode. In Myset mode, any changes made to settings other than Self-Timer and Voice Recording will be maintained even after the camera is turned off.

Lamp

Type	Operation Lamp	Camera Status Lamp	LCD Monitor
When turning on the power	7 color lights blink and then turns off when	Blinks orange once	X
	the camera is ready to take a picture
When the camera is in focus (when the	X	Green lamp lights up	Autofocus mark
SHUTTER button is pressed halfway)			lights up green
When the camera is out of focus (when the	X	Green lamp blinks	Autofocus mark
SHUTTER button is pressed halfway)			lights up red
While the flash is charging	X	Red lamp blinks	X
Flash is ready (when the SHUTTER	X	Orange lamp lights up	X
button is pressed halfway)
While saving an image	X	Green lamp blinks	X
While shooting a video	Purple lamp blinks at a 1-second interval	X	Auto focus frame : White
During voice recording	Blue lamp blinks at a 1-second interval	X	X
While the camera is connected to a PC	X	Green lamp lights up	X
WhiletransferringdatabetweenthecameraandaPC	X	Green lamp blinks	X
When shooting an image	Green lamp blinks once for 0.3 second	X	X
While the self-timer is running	Redlampblinksfor7secondsata1-secondinterval/blinks	X	X
	for3secondsata0.25secondinterval
When the LCD monitor is	X	Green lamp lights up	X
turned off in Still Image mode

Connecting to a Power Source

There are two ways in which to provide the camera with power. You can use batteries or alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A).

We recommend using batteries for a digital camera.

(use batteries that are within a year of their date of manufacture) The batteries are listed below.

Non rechargeable batteries	: Duracell CP-1 battery
Rechargeable batteries	: Digimax power pack (SLB-1037)
Battery pack	: Digimax Battery Pack (SBP-3603)

13