Samsung U-CA 3 manual Sound, LCD brightness

Sound

If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status.

Setting Operation Sounds

1.In any mode other than Voice Recording mode, press the MENU button.

2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.

3.Select the [SOUND] menu by pressing the UP/ DOWN button and press the RIGHT button.

4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.

-[SOUND] sub menu : OFF/LOW/MEDIUM/HIGH

5.Press the menu button twice and the menu will disappear.

	SETUP
IMPRINT	LOW
LAMP	MEDIUM
SOUND	HIGH
BACK:	SET:OK

LCD brightness

You can adjust the LCD brightness.

Adjusting LCD Brightness

1.In any mode other than Voice Recording mode, press the MENU button.

2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.

3.Select the [LCD] menu by pressing the UP/ DOWN button and press the RIGHT button.

4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.

-[LCD] sub menu : DARK, NORMAL, BRIGHT

5.Press the menu button twice and the menu will disappear.

	SETUP
LAMP	DARK
SOUND	NORMAL
LCD	BRIGHT
BACK:	SET:OK

69