Samsung U-CA 3 manual PictBridge Dpof Auto Print, PictBridge Reset

PictBridge : DPOF AUTO PRINT

This allows you to directly print the files with DPOF information. For instructions on how to set up DPOF, refer to pages 55 to 57.

1.Connect the camera to your printer. The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.58)

2.The [PICTBRIDGE] menu will appear.

3.Use the UP and DOWN buttons to select the [DPOF PRINT] menu, and then press the OK button.

4.The screen shown on the right will appear and the picture will be printed. If no picture is selected, the [NO IMAGE!] message will be displayed. If you press the SHUTTER button during printing, printing will be cancel and the menu from Step 2 will appear.

PICTBRIDGE

SETUP CUSTOM PRINT

DPOF PRN

MOVE: SET:OK

STOP:SHUTTER

5.If an error occurs during printing, the error message number 5 on page 61 will be displayed. For details, please refer to page 61.

PictBridge : RESET

This allows you to restore the values of the PictBridge menu, which was changed in

CUSTOMIZE, to their default values.
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] before you connect the camera to
the printer.(See p.58)		PICTBRIDGE
2. The [PICTBRIDGE] menu will appear.		PRINT
3. Select the [RESET] menu by pressing the UP/ DOWN		DPOF PRN
button and press the RIGHT button.		RESET	NO
		MOVE:	CHANGE:
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- If [NO] is selected	: Settings will not be reset.
- If [YES] is selected	: All print and image settings will be reset.

Default print setting varies depending on the printer manufacturer.

For your printer s default setting, refer to the user s guide that came with your printer.

62