Samsung U-CA 3 manual Focus lock, Flash / Left button, Auto Focus Macro Wide Tele, ~0.8

Focus lock

To focus on the subject positioned outside of the center, use the focus lock function.

Using the Focus Lock

1.Ensure the subject in the center of the autofocus frame.

2.Press the SHUTTER button halfway. The camera status lamp (green) will light up, indicating that the camera is in focus. Be careful not to press the SHUTTER button all the way down to avoid taking an unwanted picture.

3.With the SHUTTER button still pressed down only halfway, move the camera to recompose your picture as desired, and then press the SHUTTER button completely to take the picture. If you release your finger from the SHUTTER button, the focus lock function will be canceled.

[ The image to be captured ]	[ Press the SHUTTER button	[ Recompose the picture and fully
	halfway and focus on the subject ]	depress the SHUTTER button ]

FLASH( ) / LEFT button

When the menu is displayed on the LCD monitor, pressing
the LEFT( ) button makes the cursor shift to the left tab.
When the menu is not displayed on the LCD monitor, the
LEFT( ) button operates as the FLASH (	) button.
Selecting the flash mode
1. Slide the mode switch to the STILL IMAGE mode.
2. Press the Flash( ) button until the desired flash mode
indicator displays on the LCD monitor.		[ Selecting the Auto flash ]

3.A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suit the environment.

Flash range						(Unit : m)
ISO		AUTO FOCUS			MACRO
	WIDE		TELE	WIDE		TELE
AUTO	0.8~3		0.8~2	0.2~0.8		0.5~0.8

28