Samsung UA55NU7400KXXV, UA55NU7100KXXV Schedule Recording/Timeshift Function Isnt Working, 130

The Schedule Recording/Timeshift Function Isn't Working

When Timeshift or Schedule recording aren't working, these steps may help resolve the problem.

The problem	Try this!
	Check if there is a USB device connected to the TV.
Schedule Recording cannot be	Recording will automatically stop if the signal becomes too weak.
used.	Check the free space on the USB device. The function will not work if there isn't enough
	storage space on the USB device.

"" This function may not be supported depending on the model or geographical area.

Anynet+ (HDMI-CEC) Isn't Working

When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.

The problem Try this!

Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.

Check if the power cord of the Anynet+ device is properly connected. Check the cable connections of the Anynet+ device.

Anynet+ does not work.	Go to Anynet+ (HDMI-CEC) and see if Anynet+ (HDMI-CEC) has been set to On.
	●●	Settings General External Device Manager Anynet+ (HDMI-CEC)

Anynet+ may not function when some other functions are active, including Channel Search, Smart Hub, Initial Setup, etc.

If you have disconnected and then reconnected the HDMI cable, scan for devices again or turn your TV off and on.

Move the focus to the Anynet+ device at Source, and then press the up directional button.

I want to start Anynet+.	Check if the Anynet+ device is properly connected to the TV, and then select Anynet+ (HDMI-
	CEC) menu to see if Anynet+ (HDMI-CEC) is set to On.
	●●	Settings	General	External Device Manager	Anynet+ (HDMI-CEC)
I want to exit Anynet+.	Set Anynet+ (HDMI-CEC) to Off.
	●●	Settings	General	External Device Manager	Anynet+ (HDMI-CEC)

- 130 -