Samsung UA43NU7100KXXV, UA55NU7100KXXV, UA65NU7100KXXV manual Have Trouble Launching/Using Apps, 131

The problem

Try this!

The message "Connecting
to Anynet+ device..." or	You cannot use the remote control when the TV is configuring Anynet+ or switching to a
"Disconnecting from	viewing mode. Use the remote control after the TV has completed the Anynet+ configuration or
Anynet+ device" appears	has switched to a viewing mode.
on the screen.
The Anynet+ device won't	You cannot use the play function when Start Setup is in progress.
play.
	Check whether the device supports Anynet+.
	Check whether the HDMI cable is properly connected.
	Go to Anynet+ (HDMI-CEC) and see if Anynet+ (HDMI-CEC) has been set to On.
The connected device is	●●	Settings General External Device Manager Anynet+ (HDMI-CEC)
	Scan for Anynet+ devices again.
not displayed.
	Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the device is
	connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+.
	If the connection is terminated because there has been a power failure or the HDMI cable has
	been disconnected, please scan for the device again.
The TV audio is not being	Connect an optical cable to the TV and the receiver.
	ARC enables the TV to output digital sound via the HDMI (ARC) port.
played through the
	However, ARC is only available when the TV is connected to an audio receiver that supports
receiver.
	ARC.

I Have Trouble Launching/Using Apps

When apps aren't working, these steps may help resolve the problem.

The problem	Try this!
I launched an app, but	Languages supported by the app may be different from the user interface language. The ability
it's in English. How can I
	to change the language depends on the service provider.
change the language?
My application is not	Check with the service provider.
working.	Refer to the Help section on the application service provider's website.

- 131 -