Tuning broadcast signals manually

Settings Broadcasting Expert Settings Manual Tuning

You can scan for all the channels manually and store the scanned channels in the TV. To stop scanning, select Stop.

"" This function is not available on certain models in specific geographical areas.

Tuning analogue channels

Settings Broadcasting Expert Settings Manual Tuning Analogue Channel Tuning Select New and configure Programme, Colour System, Sound System, Channel, and Search to scan for

analogue channels. Then, select Store to store the scanned channels in the TV.

Channel mode

●● P (programme mode)

When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.

●● C (aerial channel mode) / S (cable channel mode)

These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.