Anynet+ (HDMI-CEC) Isn't Working

When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.

The problem

 

Try this!

 

 

 

Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+

 

devices only.

 

 

Check if the power cord of the Anynet+ device is properly connected.

 

Check the cable connections of the Anynet+ device.

 

Go to Anynet+ (HDMI-CEC) (

Settings System Expert Settings Anynet+

Anynet+ does not

(HDMI-CEC)) and see if Anynet+ (HDMI-CEC) has been set to On.

work.

Check whether the TV remote control is in TV mode.

 

Check whether the remote control is Anynet+ compatible.

 

Anynet+ may not function when some other functions are active, including Channel

 

Search, Smart Hub, Plug & Play, etc.

 

If you have disconnected and then reconnected the HDMI cable, scan for devices again

 

or turn your TV off and on.

 

 

 

I want to start Anynet+.

Check if the Anynet+ device is properly connected to the TV, and then select the

Anynet+ (HDMI-CEC) (

Settings System Expert Settings Anynet+

 

(HDMI-CEC)) menu to see if Anynet+ (HDMI-CEC) is set to On.

 

 

 

I want to exit Anynet+.

Set Anynet+ (HDMI-CEC) (

Settings System Expert Settings Anynet+

(HDMI-CEC)) to Off.

 

 

 

 

 

 

The message

 

 

"Connecting to

You cannot use the remote control when you are configuring Anynet+ or switching

Anynet+ device..."

to a viewing mode. Use the remote control after the TV has completed the Anynet+

or "Disconnecting

configuration or has switched to a viewing mode.

from Anynet+ device"

 

 

appears on the screen.

 

 

 

 

 

The Anynet+ device

You cannot use the play function when Start Setup is in progress.

won't play.

 

 

 

 

 

Check whether the device supports Anynet+.

 

Check whether the HDMI cable is properly connected.

 

Go to Anynet+ (HDMI-CEC) (

Settings System Expert Settings Anynet+

The connected device

(HDMI-CEC)) and see if Anynet+ (HDMI-CEC) has been set to On.

Scan for Anynet+ devices again.

is not displayed.

Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the

 

device is connected to your TV with an HDMI cable. Some HDMI cables may not

 

support Anynet+.

 

 

If the connection is terminated because there has been a power failure or the HDMI

 

cable has been disconnected, please scan for the device again.

 

 

The TV audio is not

Connect an optical cable to the TV and the receiver.

ARC enables the TV to output digital sound via the HDMI (ARC) port.

being played through

However, ARC is only available when the TV is connected to an audio receiver that

the receiver.

 

supports ARC.