Samsung UE46C5800QKXXU, UE37C5700QSXZG manual Manual Store, Satellite System Setup, Basic Features

Basic Features

Manual Store

Scans for a channel manually and stores in the TV.

✎✎If a channel is locked using the Child Lock function, the PIN input window appears.

When Antenna Source is set to Air or Cable:

■■ Digital Channel: When scanning has finished, channels are updated in the channel list.

✎✎ When selecting Antenna → Air: Channel, Frequency, Bandwidth

✎✎ When selecting Antenna → Cable: Frequency, Modulation, Symbol Rate

■■ Analogue Channel (Programme, Colour System, Sound System, Channel, Search): If there is abnormal sound or no sound, reselect the sound standard required.

✎✎Channel mode

xx P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.

xx C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

When Antenna Source is set to Satellite:

■■ Satellite: Selects the satellite using the up/down buttons.

■■ Transponder: Selects the transponder using the up/ down buttons.

■■ Scan Mode (All Channels / Free Channels Only): Selects either free or all channels to store.

■■ Network Search (Disable / Enable): Enable / Disable network search using the up/down buttons.

■■ Signal Quality: Display the current status of broadcasting signal.

✎✎Information on a satellite and its transponder is subject to change depending on the broadcasting conditions.

✎✎When setting is completed, move to Search and press the ENTEREbutton. Channel scan is started.

Satellite System Setup

The PIN input screen appears. Enter your 4 digit PIN number. Satellite System Setup is available when Antenna is set to Satellite. Before running Auto Store, set

Satellite System Setup. Then channel scan is run normally.

■■ Satellite Selection: You can choose the satellites for this TV.

■■ LNB Power (Off / On): Enables or disables the power supply for the LNB.

■■ LNB Settings: Configures the outdoor equipment.

––Satellite: Selects the satellite for receiving digital broadcasts.

––Transponder: Selects a transponder from the list or adds a new transponder.

––DiSEqC Mode: Selects DiSEqC mode for the selected LNB.

––Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.

––Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency.

––Tone 22 kHz (Off / On / Auto): Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should be Auto.

––Signal Quality: Display the current status of broadcasting signal.

■■ Positioner Settings: Configures the antenna positioner.

Positioner (On / Off): Enables or disables the positioned control.

Positioner Type (USALS / DiSEqC 1.2): Sets the positioned type between DiSEqC 1.2 and USALS(Universal Satellite Automatic Location System).

––My Longitude: Sets the longitude for my location.

––My Latitude: Sets the latitude for my location.

––Satellite Longitude Settings: Sets the longitude of user defined satellites.

User Mode: Sets the position of satellite antenna according to each satellite. If you store the current position of satellite antenna according to a certain satellite, when the signal of that satellite is needed, the satellite antenna can be moved to pre-populated position.

––Satellite: Selects the satellite to set the position for.

––Transponder: Selects a transponder from the list for signal reception.

––Moving Mode: Selects the movement mode between discrete and continuous movement.

––Step Size: Adjusts the step size degrees for the antenna rotation. Step Size is available when Moving Mode is set to Step.

14 English