––
––
––
––
––
––
––

●● Positioner Settings: Configures the aerial positioner. Positioner: Enables or disables the positioned control.

Positioner Type: Sets the positioned type between DiSEqC 1.2 and USALS (Universal Satellite Automatic Location System).

––My Longitude: Sets the longitude for my location.

––My Latitude: Sets the latitude for my location.

––Satellite Longitude Settings: Sets the longitude of user defined satellites. User Mode: Sets the position of satellite aerial according to each satellite.

If you store the current position of satellite aerial according to a certain satellite, when the signal of that satellite is needed, the satellite aerial can be moved to pre-populated position.

Satellite: Selects the satellite to set the position for.

Transponder: Selects a transponder from the list for signal reception.

Moving Mode: Selects the movement mode between discrete and continuous movement.

Step Size: Adjusts the step size degrees for the aerial rotation. Step Size is available when Moving Mode is set to Step.

Go To Stored Position: Rotates the aerial to the stored satellite position.

Aerial Position: Adjusts and stores the aerial position for the selected satellite.

Store Current Position: Stores current position as the selected positioner limit.

Installer Mode: Sets limits to the scope of movement of satellite aerial or reset the position. Generally, installation guide uses this function.

––Limit Position: Selects the direction of the positioner Limit.

––Aerial Position: Adjusts and stores the aerial position for the selected satellite.

––Store Current Position: Stores the current position as the selected positioner Limit.

––Go to zero: Moves the aerial to the reference position.

––Reset positioner limit: Allows the aerial to rotate over the full arc. ●● Reset all settings: All satellite settings will be reset to the initial values.