2.Select Stop when the TV attempts to connect to the network. Once the network connection has been interrupted, select IP Settings.

Network Settings

Connection verification cancelled.

Wired network connection test stopped.

 

Change Network

IP Settings

Retry

Close

3.In the IP Settings screen, set the IP setting to Enter manually, enter the IP Address, Subnet Mask, Gateway, and DNS Server values, and then select OK.

●● Use one of the following methods to enter the numerical values.

Set the numbers using the u and d buttons.

Enter the numbers directly using numerical button.

 

IP Settings

IP setting

Enter manually

IP Address

0.0.0.0

Subnet Mask

0.0.0.0

Gateway

0.0.0.0

DNS setting

Enter manually

DNS Server

0.0.0.0

OK

Cancel

4.The TV attempts to connect to the network again using the specified settings. A confirmation message appears once a connection is established. Select OK.

"" The network connection speed may differ depending on the DNS server settings.

"" For details on the DNS server settings, contact your Internet service provider (ISP).