Samsung UE55B7020WWXBT manual Setting the Network, Network Type, Cable Network Setup-Auto

¦Setting the Network

❑Network Type

Select Cable or Wireless as the method to connect to the network.

N The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.

■Cable

Connect to the network using a cable.

■Wireless

Connect to the network wirelessly.

Setup

Game Mode	: Off
BD Wise	: On
Network Type	: Cable	▶
Network Setup
Child Lock	: On
Change PIN
Parental Lock
Subtitle
Teletext Language	: - - -
Preference

❑Network Setup

■Cable Network Setup

(when Network Type is set to Cable)

NPlease check if the LAN cable is connected.

● Internet Protocol Setup → Auto / Manual

● Network Test: You can test or confirm the network connection status after setting up the network. N When unable to connect to a wired network

If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC).

In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet using an Internet Sharer (Router).

The internet connection may fail due to a firewall problem. In this case, contact your Internet service provider. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact Samsung Electronics.

Cable Network Setup-Auto

If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.

1.Set Network Type to Cable.

2.Select Cable Network Setup.

3.Set Internet Protocol Setup to Auto.

N The Internet Protocol is set automatically.

4.Select Network Test to check the network connectivity.

Cable Network Setup

Internet Protocol Setup	: Auto		▶
Network Test
IP Address	:
Subnet Mask	:
Gateway	:
DNS Server	:
	UMove EEnter	RReturn

Cable Network Setup-Manual

To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol		Cable Network Setup
		Internet Protocol Setup	: Manual					▶
(IP).
		Network Test
1.	Set Network Type to Cable.
		IP Address	:
				0	0	0	0
2.	Select Cable Network Setup.	Subnet Mask	:
				0	0	0	0
		Gateway	:
3.	Set Internet Protocol Setup to Manual.			0	0	0	0
		DNS Server	:
				0	0	0	0
4.	Set up IP Address, Subnet Mask, Gateway and DNS Server.		UMove		EEnter		RReturn
	N Press the number buttons on the remote control when you set the Network manually.
5.	Select Network Test to check the network connectivity.
■ Wireless Network Setup
N The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.
●	Internet Protocol Setup → Auto / Manual
●	Network Test: You can test or confirm the network connection status after setting up the network.

English - 32