C O N N E C T I O N S

Before Connecting the DVD-VCR

-Always turn off the DVD-VCR, TV, and other components before you connect or disconnect any cables.

-Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.

Connection to a TV

The following shows examples of connections commonly used to connect the DVD-VCR with a TV and other components.

Connection to a TV (Video)

1

Using video/audio cables, connect the VIDEO

(yellow)/AUDIO (red and white) OUT terminals

on the rear of the DVD-VCR to the VIDEO

(yellow)/AUDIO (red and white) IN terminals of your TV.

2

Turn on the DVD-VCR and TV.

3

Press the input selector on your TV remote control until the Video signal from the DVD-VCR appears on the TV screen.

Yellow Red

White

Video Cable

Audio Cable

Yellow Red

White

Notes

-Noise may be generated if the audio cable is placed too close to the power cable.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 21 to 22).

-The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of your TV.

-If there is one audio input terminal on the TV, connect it to the LINE OUT AUDIO OUT Left (white) terminal of the DVD-VCR.

-If you press the P.SCAN button when DVD-VCR is in stop mode or no disc is inserted, the Alt Video Out mode changes in the following sequence: (S-Video - Interlace - Progressive)

-When the Alt Video Output in the Display setup menu is set to Progressive, the Video and S-Video Outputs do not work.

ENG-15

Page 15
Image 15
Samsung 00956L, V9650-XAC, 20060509084435281 Before Connecting the DVD-VCR, Connection to a TV Video, ENG-15