Samsung V9650-XAC, 20060509084435281, 00956L Display Options, ENG-64, TV Aspect, Alt Video Out

DVD OP E R AT I O N S

Display Options

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).

-4:3 Letter Box: Select when you want to see the total 16:9 ratio screen the DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

-4:3 Pan Scan: Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

-16:9 Wide: You can view the full 16:9 picture on your wide screen TV.

Black Level
The Black Level feature	On

adjusts black reference level in the video signal to one of two choices:

- On: This will enhance the Black Level for increased brightness/contrast when viewing DVDs.

-Off: This is the Standard NTSC reference Black

Level for consistent brightness/contrast across all sources.

Alt Video Out

The “Alt Video Out” option must be set in the on-screen menu to enable the output you have connected to your TV.

- COMPOSITE/S-VIDEO: Select when you want to use S- Video or Composite (Video) output.

-COMPONENT (I-SCAN): Select when you want to use Component interlace(480i) Out.

-HDMI/COMPONENT (P-SCAN) : Select when you want to use the Component(480p) or HDMI(480p/720p/1080i) out.

Note

It cannot be adjusted when Alt Video Out is set to Progressive.

▼ -	See your TV owner’s manual to
	determine what type of TV you have.
-	COMPONENT (I-SCAN): Interlaced

Scan mode will work.

- HDMI/COMPONENT (P-SCAN): Progressive Scan mode will work, and Video and S-Video will not work.

- Press the P-SCAN button on the front panel in stop mode.

Be sure to set the correct Video output for the proper picture.

ENG-64