Operating the cleaner
Installing the robotic vacuum cleaner
Installing the Smart gate
You can confine the robotic vacuum cleaner to a particular section by using Fence (virtual wall) mode or clean several sections one by one using Guard (virtual door) mode.
Mode Lamp
Distance Detection 
Sensor
Main Unit Detection Sensor 
Mode/Power Button 
Distance Control Switch
Fence/Guard/Off
Distance
Fence/Guard/Off
2
Distance
3
Distance Detection Sensor
Button operations
1.Mode lamp operations
-Fence (virtual wall) Mode: The red lamp flashes.
-Guard (virtual door) Mode: The green lamp flashes.
-Off: The lamp is turned off.
2.Setting the mode
-Whenever you press the Mode/Power button, Fence
(virtual wall) mode ➝ Guard (virtual door) mode ➝
Power off is selected in this sequence.
3.Setting the Fence length
-Set the distance to restrict the access of robotic vacuum cleaner from the Smart gate using the distance control switch.
✽The distance detection sensor forms a virtual straight barrier of the specified fence length.
Switch Setting | Max Distance |
• (Short) | About 1 m |
|
|
•• (Medium) | About 2 m |
••• (Long) | About 3 m |
✽Set the switch according to the required fence length.
Forming a Fence (virtual wall)
Smart gate creates an invisible barrier that the robotic vacuum cleaner cannot cross.
E.g. in front of pots, furniture, the front door, and so on.
1.Select Fence (virtual wall) mode using the Mode/ Power button.
- The mode lamp flashes red.
2.Set the fence length using the distance control switch.
Distance |
Sensor |
A fence (virtual wall) |
is formed. |
3.Install the Smart gate in front of the area you want to block access from the robotic vacuum cleaner.
-Install the Smart gate so that the distance detection sensor can form an invisible barrier that the robotic vacuum cleaner cannot cross.
