Operating the cleaner
Using Guard (virtual door) mode |
| thecleaner | |
The Smart gate forms an invisible door that the robotic |
| ||
| Room | ||
vacuum cleaner cannot cross until current room is | Room 1 | ||
complete cleaned. The Smart gate opens the invisible |
|
| |
door when cleaning the room is complete. |
| 03operating | |
1. Select Guard (virtual door) mode using the Mode/ |
| ||
Power button. |
| ||
- The mode lamp flashes green. |
| ||
|
| ||
2. Set the fence length using the distance control |
| Room | |
switch. | Charger | Smart gate | |
|
| ||
3. Install the Smart gate at the entrance of the room |
|
| |
to be cleaned. |
|
| |
- Install the Smart gate so that the distance detection | Distance Detection Sensor | ||
| sensor can form an invisible barrier that the robotic | ||
| vacuum cleaner cannot cross. |
|
|
| ● When not using the Smart gate, turn the power off. | 30cm |
|
|
|
| |
NOTE | (When not using the robotic for long periods of time, | A guard (virtual door) is formed. | |
separate the batteries to avoid discharging them.) |
|
| |
| ✽ Since an invisible barrier is formed | ||
| ● If the Mode/Power button does not work, it indicates | ||
| to prevent the robotic vacuum | ||
| that the batteries have worn out. In this case, replace | ||
| cleaner from running against the | ||
| the batteries. (Specifications: Type D (LR20) alkaline | ||
| batteries ) | Smart gate, installing the Smart | |
| ● You can additionally purchase an Smart gate from | gate within 30 cm of the outside | |
| Samsung Electronics customer care Co., Ltd. | walls is recommended. | |
About the IrDA sensor.
CAUTION ● The infrared signal transmission may not be smooth in locations exposed to halogen lamps or in outdoor locations.
●Robotic vacuum cleaner uses 3 types of
infrared devices and a device may not | Remote Control | Smart gate | Charger | |
work in front of another device with a | ||||
|
|
| ||
higher priority. |
|
|
|
●When controlling the robotic vacuum cleaner with the remote control, the robotic vacuum cleaner may cross the virtual fence of the Smart gate or run against an obstacle, because the remote control signal has a higher priority than the Smart gate signal.
●When using the robotic vacuum cleaner in a small location or at a close distance, it may malfunction due to interference of the infrared signals.
●Install the Smart gate away from the charger as auto charging may be interrupted if the Smart gate is near the charger.
●If the fence length is set to a value longer than the required distance, the robotic vacuum cleaner may fail to clean properly.
Set the fence length to an appropriate value using the distance control switch.
●If more than one robotic vacuum is used simultaneously, they may malfunction due to interference of the infrared signals.
●Turn the Smart gate in another direction or set the fence length to an appropriate value if the distance detection sensor of the Smart gate faces the charger, as it may interrupt auto charging.
Operating the cleaner _25
