PICKER DRUM MAINTENANCE
To reduce the risk of injury from moving parts, turn off vacuum cleaner and disconnect WARNING Power Plug from electrical outlet.
1. Unplug cleaner from electrical outlet.
2. Place handle in low position and turn vacuum cleaner over so bottom side is up.
3. Remove the six screws as shown with a screwdriver.
4. Grasp Picker Drum at both ends and lift.
5. Clean strings, hair and other debris from Picker Drum, paying | Brush Cover |
particular attention to Drum ends. |
|
6.Replace the cleaned Picker Drum down into both end slots as shown.
7. Reposition Brush Cover and screw or snap back into place. Check to be sure all screws or latches are secured.
03 MAINTENANCE
①
②
maintenance _13
