maintenance
To reduce the risk of electronic shock, turn Power Switch Off and disconnect polarized WARNING plug from electrical outlet before performing maintenance or troubleshooting checks.
For maximum cleaning performance, check and clean or replace all filters as suggested.
EMPTY DUST BIN
1)To remove the dust bin from the cleaner body, push the dust bin release button.
Dust Bin Release
Button
4)After cleaning out cyclone, ensure that cyclone cap is properly inserted and secured in place.
2)Hold dust bin over waste receptacle and push the thumb button to release contents.
Trun cyclone cap to right until tab of cyclone cap fits into notch on rim of cyclone chamber.
5)Replace dust bin into vacuum cleaner. Make sure bin base is securely fitted to body grille as shown.
3)Turn cyclone cap to left and pull out to remove. Clean debris from cyclone chamber. Replace cyclone cap.
10_ maintenance
