PETZ TURBO BRUSH (*select models only)
The Petz Turbo Brush should be checked regularly for clogs or debris wrapping around the brush.
1. Unplug the vacuum from electrical outlet.
2. If a clog is present or debris is visible, unscrew the two screws on the back of the Petz Turbo Brush to remove the faceplate and clear any obstructions.
3.To clean debris from the brushroll, remove the brushroll from the drive belt and clean debris.
4.Reposition the drive belt on the brushroll.
Place ends of brushroll in slots on sides. Reposition faceplate and secure with two screws.
This tool is designed to remove pet hair from upholstered or carpeted surfaces. It should not be used on pets.
03 MAINTENANCE
maintenance _15
