Network, IP Setup | Samsung VKKF004NUS specs

NETWORK

You can configure the settings of IP SETUP, DDNS and E-MAIL. See the previous section to repeat steps 1~3. (Page 25)

You can specify the IP of the DVR according to the network connection.

Using the mouse may help easy setup.

1.Use the direction buttons to move to the upper

<NETWORK> icon and press the [ENTER] button. The IP Setup screen appears.

2.Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.

-If <DHCP> is selected, the setting values of IP ADDRESS, GATEWAY, SUBNET MASK, 1st DNS SERVER and 2nd DNS SERVER will be automatically filled.

-If <DHCP> is not selected, you should manually enter the setting values of IP ADDRESS, GATEWAY, SUBNET MASK, 1st DNS SERVER and 2nd DNS SERVER.

•IP ADDRESS: Enter an IP address.

•GATEWAY: Enter a gateway address.

•SUBNET MASK: Enter a subnet mask address.

•1st DNS SERVER: Enter the first DNS server address.

•2nd DNS SERVER: Enter the second DNS server address.

•RTSP SERVICE PORT: Indicates a port used when the remote management software program accesses the DVR.

•WEB SERVER PORT: Indicates a port used to connect to the DVR using the web browser.

•AUTO PORT: Registers connectable address from outside to DDNS HOST NAME automatically.

•DELETE PORT: Unblock registered port forwarding status.

•PORT TEST: Check the current RTSP PORT, HTTP PORT status by itself whether it is connectable.

•DDNS HOST NAME: Displays the MAC address of the DVR that connects to the DDNS.

•MAX TX SPEED: Set the network transfer speed.

Select one from 56, 128, 256, 512, 1024, 2048, 4096, 8192KBYTE.

The video will be transferred below the set speed, which may differ according to the network connection status.

3.When your settings are completed, press the <APPLY> button on the bottom. Your settings will be applied.

4.Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.

38_ DVR setup

Lo-Call 1890 866 900